GMI aftermarket dies and punches, compatible with Corbin presses
Aftermarket die sets, punches and adapters compatible with Corbin CSP-1/CSP-2 and Hydro presses, from .177 to .457. Every die set runs through the GMI adapter for your press: buy it with your first die set, or on its own. Any standard Corbin CSP-1/CSP-2 or Hydro press works with the GMI adapter, with no modification.
The Freedom and Corbin compatible die sets share the same die body. A Corbin compatible die set does not work on the Freedom Press as supplied: if you upgrade to a Freedom Press in the future, you will need to buy the Freedom ejector pin and pin holder to make it work. Moving a Freedom die set to a Corbin press needs the GMI adapter plus the Corbin ejector pin and pin holder. Ask us which parts you need.
Corbin® is a registered trademark of its respective owner. GMI Engineering is an independent manufacturer and is not affiliated with, authorized by, or endorsed by Corbin Manufacturing.
Lead time4–6 weeks, made to order
ShipsWorldwide by FedEx, DHL or UPS
Heading 5
Corbin CSP-1 / CSP-2
The GMI punch for the CSP punch holder. Die sets and the GMI adapter for this press are under “For both presses” below.
Heading 5
Heading 5
Corbin Hydro
The Hydro-specific GMI punch, held by the punch holder already on your Hydro press. Die sets and the GMI adapter for this press are under “For both presses” below.
Heading 5
Heading 5
Heading 5
Heading 5
Heading 5
Heading 5
Heading 5
Heading 5
For both presses
Die sets and the GMI adapter work on the CSP-1/CSP-2 and the Hydro. The adapter you receive matches your press: a die adapter and punch adapter for the CSP, a die adapter for the Hydro.
